Many who want to get into growing want to build a grower box, but at the same time, they have no idea where exactly they should start. It is very easy to make a grow box yourself, but there are a lot of details and nuances that you need to take into account if you are going to make a grow box at home.

Growbox characteristics

Growbox is a box, of different sizes, in which the cultivation of crops takes place. Its proportions and sizes may be different, depending on the type and type of box, as well as the type of plants that will be grown in it. It does not matter whether it is a homemade grow box or a turnkey one, it must have lighting systems and a ventilation system.

Basic elements of a grower box

In beginner growing, it is important to know the basic elements when building a grow box. First of all, it is a reflective surface. All internal walls must be covered with a light-reflecting material, preferably foil or penofol. This will reflect the light from the lamps throughout the space and reach the light in those parts of the plants where they are most needed. It is necessary not to leave a single area uncovered, otherwise this will lead to disastrous consequences.

The second important aspect is light. Lamps must be purchased high-quality and powerful, most often, in growing, they use HPS sodium lamps. They radiate a lot of heat and are very dangerous to work with bare skin or eyes, but they are recommended to be installed in homemade grower boxes. Remember that bulbs can burn out and you need to have spare ones so that your crop does not die due to a sudden change in day-night mode.

The ventilation system shares its place with the light system in importance. The lamps heat the air in the box, and the increased temperature will destroy your plants, which is clearly not to your liking. Fans remove heated air from the box, launching fresh air in, thereby creating circulation. Install several coolers for constant blowing of plants to maintain the desired climate within the box.

Also, you will need to install a timer or time relay on your lighting system. It will allow you to be free to be out of the house when turning on or off the lamps to maintain the day-night regime necessary for growing many crops.

These components are vital for any grow box. If you're growing plants that give off a strong scent, just install charcoal filters in your grow box to avoid this. Another good tip when building a grower box is to create compartments. Divide the space into a compartment for equipment and a compartment for plants, so that it will be more convenient for you to work with it in the future. If you want to buy a ready-made grower box, check the availability of similar compartments.

Varieties of growboxes

Growboxes come in a variety of types and the choice of type depends directly on your needs, as well as on the plants you wish to grow. Boxes are divided into 4 main types:

• Growbox is standard - it can be made from an ordinary cabinet, bedside table, refrigerator or other items and furniture.
• The growbox is compact - the main characteristic of which is capacity and small size. The best example of a minibox is a system unit.
• A growroom is a room reserved for the needs of a grower.
• Stealth is a disguised box that has increased light and noise insulation.

Standard boxing must be at least 1m*1m*2m. Of course, the volumes can be much larger, it is important to harmoniously decompose the equipment and plants into the designated compartments. Reasonable disposal of the allocated space is one of the important aspects of building a grow box manually. Try not to fill the box with plants, as each of them needs a certain amount of space to grow. If they are too close to each other, this can lead to certain problems and possible crop loss.

Making a growbox

First, we need a box. The volume of this box or the furniture from which it will be made depends on the type of box you have chosen. In some cases, a grow tent can be purchased as a base, it is important that its coating is completely reflective. The awning itself is always comfortable and light, which allows it to be used as the basis for a future grower box. If the material does not reflect enough light or there is a surface of the box where there is no light reflection, correct this with foil or penofol.

The next task is to equip the ventilation and lighting system. This was mentioned above. In addition to HPS lamps, lamps can be used:

Don't forget extra coolers and charcoal filters if you want to get rid of the smell. Such filters, by the way, are mandatory when building a stealth grow box. The timer should only turn on the lighting and ventilation system, but not the coolers, which work in both "day" and "night" modes.
Additional technical elements, such as measuring instruments or automation, will not interfere for a more complete work process, without human intervention.

Do not forget about the installation of compartments for equipment and plants. Separating the box will help you a lot in your future work. Primarily:
The technology heats up the air. If additional equipment, in addition to lamps, is located next to the plants, the ventilation system may not be able to cope with the heated air and the plants will die.

The wires will not be scattered and scattered throughout the box and will not interfere with the development of the sprout, and you will not be prevented from interacting with the plants.
It is very practical and beautiful. What's more, you can conveniently reach the faulty machinery and troubleshoot.

Do not forget that in a standard box there may be auxiliary devices, namely: a thermohygrometer, meters for light power, soil moisture, and most importantly, a protection device in case of power outages.

In any case, it will not work to automate the process completely. Some points must be performed for a person - for example - watering plants. Remember that when opening the box, outside light should not be allowed in, as this will cause stress or failure of your plant's day-night regimen. Place all the necessary elements wisely, calculate the layout in detail with a small grow box and you will get the maximum result.

No sun, no need. You can still grow your own healthy food crop. You can grow and manage your garden in your home with the push of a few buttons on your smartphone.

In the 21st century, there have been significant changes in the way people live, in particular in relation to food. More and more people want their food to be fresh, free of pesticides and other harmful substances. And all year round. And this will allow you to carry out a home vertical farm from CityCrop.

The good news: Crop production is moving forward! Gone are the days when the perfect crop had to be produced on a remote farm using specific soil types and all sorts of additives. Today, it can be obtained in a city apartment or in any roadside diner. Electronics will allow you to control not only temperature and humidity, but also other environmental parameters.

Sustainable, fresh and modern

CityCrop positions itself as an enterprise aimed at the modernization of agriculture. The main task of the company is the production of healthy, environmentally friendly food. All of this, fresh and healthy, has the undeniable advantage of being completely free of pesticides.

The company offers a vertical indoor garden that measures 45cm long, 45cm wide and 88cm high. The control system is fully supported by applications in iPhone and Android operating systems. In a few words, it can be described as follows: an automated indoor farming system that includes high-tech elements that allow you to grow vegetables indoors, anywhere, at any time. The system is designed for precise control of humidity, temperature, lighting and ventilation. The use of hydroponics allows you to organize the feeding of plants with nutrients in an accurate dosage directly from the nutrient solution of fertilizers.

What is hydroponics? It is a method of crop production that has been practiced for hundreds of years. It is used to grow plants without using soil. And the nutrients are absorbed by the plants directly from the water in which the roots grow.

Thus, it is time to tell how people can grow plants on their own, vertical farms. Very easy, here's how:

First, the CityCrop application must be downloaded to your smartphone (from the App or GooglePlay soft stores). This will allow you to control the growing conditions of the plants on your indoor farm. Obviously, the system can be controlled from anywhere in the world.

Next, you need to plant the seeds in comfortable, adjustable trays and wait for them to germinate. And further, you can enjoy how the system informs you about the process of growing your products. And finally, the products are ready. Next stop, fresh food!

By installing the system at home, we get a lot.

Climate control. The system is designed to control temperature, humidity, lighting, ventilation and more.

Hydroponics system. Plants take all the nutrients they need directly from the water.

Adjustable Trays Choose the perfect tray for growing a wide variety of plants and have an easy and enjoyable growing experience.

Network control. Connect your device with Wi-Fi and start growing.

Feeding system with dispenser. The system accurately measures the concentration and regulates the supply of nutrients.

LED lightening. Precise adjustment of the spectral composition of illumination is optimal for plants in each phase of its development.

Import settings. Select a plant and the app will automatically adapt the correct settings for it.

Real time monitoring. Monitor the status of your plantation remotely, from anywhere in the world.

Here's what you can grow at home!

CityCrop is a closed growing system that allows you to grow vegetables, herbs and fruits without pesticides in your own home. Through mobile applications, you can decide which plant to grow and control the entire production process of your products. The hydroponics method and microclimate control allow plants to be grown all year round.

PROBLEM:

Over the past 20 years, traditional agriculture has faced a number of serious challenges. Water and land supplies are declining, while population and food waste are on the rise. This means that the current practices used on large farms are no longer viable and cannot maintain their unchallenged dominance in food production. Today, urban crop farms are mostly built on hydroponics. This is an expensive and complex technology that requires serious maintenance. This needs to be changed.

CityCrop SOLUTION:

CityCrop is suitable for most indoor environments and allows you to grow plants at a lower cost than traditional farming while meeting local product needs. This allows you to grow high quality food using less energy and water. Fresh produce grown with CityCrop, on average contains up to 600% more vitamins and contains no pesticides, fungicides or other poisons. The CityCrop device truly allows users to grow fresh, clean food with minimal effort.

Many people dream of having their own vegetables and fruits all year round. An excellent tool for this is the growbox. What is it and what are the main points of working with it further.

Growbox or is a professional equipment that helps to grow seedlings and indoor flowers. It also allows you to create a pleasant microclimate for plants and do everything so that the environmental conditions are favorable. It's great for a variety of purposes. It can freely grow a variety of fruit and vegetable crops.

A grow box is a great replacement for many things, such as a conservatory, a country house or a greenhouse, because it takes up little space. It is located within the apartment and can help pass the long, winter evenings.

Classification

Today there is a whole classification of these devices:

1. Standard. It is distinguished by its optimal dimensions. They are defined as 1000×1000×2000 mm. Such dimensions will help the young gardener to easily place a pair of mature photoperiod plants that will not interfere with each other's growth during their active flowering.
2. Stealth. It is the most difficult and interesting type of growbox, hidden and inconspicuous. It has a lot of advantages, for example, isolation of noise and light.
3. Groocompact. It has small dimensions, which is why it is placed in an ordinary room. This is a great option for those who need to grow small flowers.

Interesting! You can make a small grow box out of the fridge.

There are many offers on the market. However, today you can create a growbox with your own hands. The main task is to provide acceptable conditions for growing plants. When designing begins, you can apply the advice of experts or go your own way.

For the manufacture of this equipment, you will need things and tools in the form of:

1. Cabinet, box or chipboard box;
2. Films with foil or other material;
3. Thermometer and hygrometer for measuring temperature with humidity;
4. , lamp or other lighting device;
5. Pots, boxes, containers where plants will be kept.

1. Project. We prepare a drawing of a grow box, a diagram or a color project on a computer with how it will look;
2. Purchase of all material and storing it in one place.
3. Growbox formations. Schemes for construction can be found ready-made on the Internet. For example, you can use this:

Lighting

Many are mistaken in thinking that any lamps are suitable for lighting a grow box. To grow a certain plant, a certain light and temperature is required. The fact is that incandescent lamps, for example, emit additional heat and have a strong glow. This can kill some flowers when exposed directly to the lamp.

Types of suitable grow box lamps:

1. DNAt are sodium lamps, which are required to provide supplementary lighting to plants or light up streets;
2. CFL are considered medium-sized fluorescent lighting devices;
3. ESL in translation - lamps that save electricity;
4. 4 Led have special LED properties for enhanced plant growth.

Ventilation must be, there are no restrictions on the choice. The main thing is that the chosen system helps to renew the air inside it and get rid of the hot air emitted by the lamp. If you use the advice of agronomists, you can come to a single decision about the temperature. For all plants, it should be from +22 to +27 0 С.

You can create the correct operation of ventilation and all equipment if you use things in the form of an electronic timer or relay. This is optional equipment, but it makes life much easier. The timer turns on and off for lighting along with the fan device in the box. At the time of development or vegetation, you need to know that at this time all flowers need to be given light until eighteen hours during the day and six hours at night. When it becomes an adult and enters into flowering, the pre-light can be set to twelve hours in the daytime and the same number of hours at night.

How to make a charcoal filter for your grow box

They are used to get rid of the unstable basic synthesis that accumulates in space. That is, getting rid of the bad smell. They help, in addition, to purify the air of dust, which is harmful to everyone.

Today, there are many schemes for creating a carbon filter with your own hands. A lot of useful material is contained in the video tutorial:

Compliance with the temperature regime

What temperature should the grow box be? Everyone loves stability, including plants. Make sure that the temperature set for their growth always remains the same. Remember that lamps heat the air very much. In addition, they can burn the leaves and then they will dry out faster. Use blowers and carbon filters.

If you need to lower the temperature by 1-2C, use a humidifier, but do not get carried away with this, since the humidity cannot exceed 65-70% at the vegetative stage and 55-60% at flowering. If the problem is low temperatures, install heaters.

Watering and moisturizing

Watering should be moderate. It is necessary to pick it up according to the type of a particular flower. It needs to be done at least once a day. Automatic watering allows you to permanently eliminate the problem of drying and waterlogging of substrates. It helps the young gardener get rid of the need to water all the time. The volume of the tank for automatic watering is calculated according to the type of greenhouse and the number of plants. You can roughly calculate using this simple formula 30 liters per 1 sq. m. Remember that less liquid is consumed during the growing season than during the flowering process.

What plants are suitable for growing in a grow box

In the growbox, you can grow herbs, flowers, fruits or vegetables. You can grow several crops at the same time. Also there you can get other cultural, ornamental, exotic plants.

And finally, a video review of a small do-it-yourself growbox:

In the modern world, the ideas of environmental friendliness and a healthy lifestyle are gaining more and more popularity. That is why many people decide to grow their own greens and vegetables. Unfortunately, not everyone has summer cottages. The way out of this situation is growbox. With this design, you can grow a full-fledged crop right in your apartment.

How to make a growbox

First you need to understand what a growbox is and how it functions. In fact, it is a small mini-greenhouse that creates certain conditions for the good growth of vegetables, flowers or herbs. At first glance, it may seem that its design is complex. In fact, to build a useful device is within the power of anyone who understands even a little about the principles of gardening.

Simplified, a growbox is a closet in which lighting and a ventilation system are installed. Of course, many may think that instead of it, you can simply rearrange the plants on the window closer to the light. Unfortunately, this option will not lead to good growth. In the conditions of winter and late autumn, vegetables and herbs will still not have enough light. And the temperature and humidity in a heated apartment will constantly change. As a result, growth will inevitably slow down. Growbox successfully copes with these problems.

Growbox: photo

First of all, you need to decide on the size. It is from them that the number of lamps inside the box and the type of ventilation will depend. Also, the area greatly affects the number of plants grown. Among gardeners today, disputes do not subside. It seems to some that the optimal size is at least 1 m in height, and to others - 1.8 m. Be that as it may, it is better not to build boxes less than 1 m in height. In such growboxes, you will not be able to grow a healthy plant. In addition, the risk of leaf burns will increase, which will occur due to the small distance from the lamps. You should also focus on the size of the room in which the future crop will be grown.

As a basis, you can use old furniture, cases from system units, various drawers. In order to fit the growbox to the desired size, you can build it from fiberboard sheets. In this case, you should know that if a finished box is taken, then it must be perfectly even. Even 5 mm is not allowed between the walls. gaps. This can adversely affect the maintenance of the microclimate inside the grow box.

Another important point is lamps and reflective film. You can find instructions in which it is proposed to paste over the inner surface of a room mini-greenhouse with ordinary foil. It is better to refuse such material. It is worth buying penafol at a construction or country store. It is similar to foil, but much better in properties and functions. It is used for insulation and light reflection. In the second case, it is better to buy sheets of small thickness. Also, some gardeners prefer to paint the walls with light paint. A similar method for reflecting light and heat is also not suitable.

Also, to create a growbox, you will need additional materials. Penafol can be glued in different ways - on the glue of a special thermal gun, double-sided tape. The best way is to use a construction stapler. He will fix the material tightly. The resulting joints require mandatory sealing. To do this, use a special silver-colored aluminum tape. If you decide to make a grow box from an old system unit, then most likely you will have to stock up on fiberboard sheets. There are many different holes in these boxes. The inside can be reinforced with plywood sheets, and then reflective material can be attached to them.

Separately, it is worth considering the issue of lighting. The power of the lamps will directly depend on the area of ​​\u200b\u200bthe box. It is better to use high pressure sodium lamps. If the system unit acts as a grow box, then 250 watts is enough. With an area of ​​1.2 sq. m. - respectively 600 watts. Sometimes there are lamps with an inserted reflective strip. They can be used too.

Also for a mini-greenhouse you will need a fan. It can be replaced with a cooler. Complex options for growboxes involve the creation of an automatic system for turning on and off lighting. You can do without it and do it manually.

DIY growbox

No matter how it seems that the simplest option for a growbox is a mini-greenhouse from an old system unit, not all plants will be able to grow in it. Therefore, it is better to make a more versatile option with your own hands. It is worth mentioning right away that the amount of materials depends on the size of the growbox.

You will need:

• Ready-made cabinet with a door or chipboard sheets and timber
• foil penafol
• Pilot extension for multiple outlets (minimum 3)
• Nails and screws
• DNT lamps
• Corrugated pipe with a diameter of 15 cm.
• Wires, chain, plug for euro socket
• 2-3 fans
• Timer (optional)
• Drill, construction tape

Manufacturing instructions:

1. If there is no ready-made cabinet with a door, then we build it from chipboard and timber. To do this, we connect the sheets of the desired size with the help of boards and screws. We fasten so that there are no gaps. If necessary, you can make a frame from a bar, insulate it with foam plastic and then sheathe it with chipboard. Don't forget to provide a door.
2. We cover the inner surface with penofol and fix it with staples of a construction stapler. If you do not have this tool, then light reflection can be done at the previous stage of assembling the box. To do this, the surface of the parts is covered with material nailed with nails. Light reflection with penofol is also done for the finished cabinet in any convenient way.
3. We focus on the fans at the top of the growbox. To do this, you can nail a beam or rail to the ceiling. The easiest way is to mount them on specially cut rectangles. They are usually made from hardboard, cutting a hole of the desired diameter. A fan is inserted into the plate, and then the structure is attached to the ceiling. Thus, the design will be more stable.
4. Then proceed to the installation of wiring. To do this, drill small holes with a drill so that the cords pass. This must be done in accordance with the intended location of the lamps. Usually they are placed on top and on the sides. The wires are connected to the lamps. Forks are made at the ends. The length should be such that the wire can reach the extension cord. It is best to invite a professional electrician to create the wiring to help you make the correct wiring. Otherwise, you can not only ruin the grow box, but also harm your health. The specialist, if desired, will be able to set a timer for turning on and off the light. This will help create the desired mode for plants, since they do not need constant rays.
5. Finally, in the grow box, you can install a thermometer and a device that measures humidity.

The required temperature in the box is created by special heating devices. As for humidity, it can be raised by simply placing a bowl of water next to the pot. It is believed that its rate should be at least 40% for the normal development of plants. It should be understood that air humidity is created taking into account the needs of vegetables and flowers. It is necessary to take into account their individual characteristics.

A grow box with your own hands can allow you to grow radishes, various greens and even tomatoes at home. It will take only 1-2 days to make it. First you need to decide what will be grown in the mini-greenhouse. This depends on the size of the growbox. You can make a box from any materials at hand - cabinets, a refrigerator or a system unit.

Be the first to know about upcoming promotions and discounts. We do not send spam or share email with third parties.

DIY growbox

Growbox is a closed structure that is designed to create an optimal microclimate for growing plants. Its size can be different, depending on how many plantings the grower plans to place in it. Quite often, growers use ready-made furniture to create a grow box, for example, a wardrobe or pantry. There are a lot of options from which to make a growbox.

In this article, we will talk about how to make a grow box at home with your own hands from scratch. However, it also contains useful information for those who have already taken old furniture into account, wanting to breathe new life into it. So, now about everything in order. We present a step-by-step instruction "How to make a grow box with your own hands."

The design and material of the growbox

The most affordable and common material for creating a grow box is chipboard. It can be used new or former use, the main thing is to cut it to give the desired size. Growbox dimensions can be purely individual. It all depends on how many plants the gardener plans to grow in it and the availability of free space in the room.

Its height is very important, since it is it that will limit the vertical space for the growth of representatives of the flora. If the grower plans to grow something large in size, then the height of the grow box should certainly be selected based on the maximum growth of this crop. In most cases, a height of 1.5-2 meters is sufficient. And if the grower plans to grow undersized plants, then he will have to make a stealth growbox, the height of which can be only 0.8-1 meter. The main thing here is to take into account the fact that the light source will occupy another 30 cm of vertical space.

So, the grower determines the dimensions, after which he orders the sawing of chipboard sheets. Then, using any fasteners, he assembles the structure. It will not be superfluous to create in its upper part a small technical compartment 10-20 cm high, in which all the electrics will be located. Also, most likely it will be necessary to seal the doors with special material so that the light does not enter the structure and does not leave it. The presence of a lock on the door will also not be superfluous, especially if the gardener has small children.

We will not tell you how to make a grow box from a closet or other furniture. To do this, it will be enough for the grower to go to the second paragraph of our instructions on how to properly make a grow box.

When the design of the growbox is ready, it will be possible to start arranging it. The first thing a grower needs to do is cover the inside walls of the grow box with reflective material. You should not use foil or penofol, as the light will be refracted, but if the budget is limited, it is better to cover the walls of the box with ordinary white matte paint. The best option would be Mylar Diamond ECO reflective film. Mylar film is able to significantly reduce the loss of light rays, with irrational scattering. It evenly distributes light over the entire cultivation area. This feature is possible due to the diamond-shaped three-dimensional pattern, which does not allow light rays to concentrate in one place (usually this leads to the creation of hot spots that cause burns in plants). Its reflection coefficient is 97%. The material of the product has a high tensile strength, and therefore can last for many years.

Now we move on to the question of how to equip the grow box. The first thing we will start with is the lighting of the grow box. Without it, in any way, because any plant will not live without light for several days. Even when the grower was just thinking about how to build a grow box, he had to take into account the dimensions of the lamp. Even if you hang it from the ceiling itself, it will take up about 30 cm of vertical space. And if you use a rod or other hanging fasteners, then this is all 40-50 cm. This distance will directly depend on which lamps the grower chooses to light the grow box.

Now to the most important question - how to choose lamps for growboxes. Their choice will directly depend on the dimensions of the structure and the number of plants that are located in it.

For small home structures, which include almost all grow boxes and stealth boxes, we recommend using neon lights. They practically do not heat up during operation, which makes it easy to maintain the temperature inside the structure at a level favorable for plants. They are also quite compact and consume relatively little electricity, which undoubtedly has a positive effect on the bills.

For the vegetative stage, the TNeon 6500 K Growing lamp will be a suitable option. The spectral composition of the lamp is ideal for plant growth. Dominant blue light takes an active part in photosynthesis, allowing crops to grow leafy mass. For the flowering stage, a similar lamp would be an excellent option, only with a different spectral composition, in which red light dominates - the TNeon 2100 K Blooming lamp.

It has a beneficial effect on crops, allowing them to form inflorescences and fruits. Both lamps are made of high quality alloys, which guarantee a long service life. They are recommended to be used in pairs by installing them in a TNeon 2x55W luminaire.

With its help, plants will receive light of a favorable spectral composition during any stage of their life. Both lamps are powered independently, which allows them to be switched on separately. The device is made of durable steel sheet and coated with a durable white paint that effectively reflects light. It can be hung with special hooks. It is also equipped with an electronic ballast, a 2G11 base and a three-pin power connector.

For full-fledged growboxes with a height of 1.7 meters or more, we recommend opting for HPS lighting. It is worth noting that the higher the lamp power, the more area it illuminates, however, more heat is generated, so we recommend purchasing a closed-type pendant lamp CoolMaster.

To illuminate 1-2 medium-sized plants, we recommend purchasing a 250 W HPS lamp, which illuminates about 0.36 m2.

To start the lamp, you will need an electronic ballast that matches the power of the lamp.

Growbox ventilation

Ventilation is a very important part of any grow box. It allows not only to renew the air inside the structure, providing an influx of carbon dioxide, but also to remove hot air that occurs due to the heating of lighting fixtures during operation. This greatly simplifies the grower's life, because it becomes much easier for him to maintain a favorable temperature inside. Also, do not forget that with the help of ventilation, you can regulate the humidity inside the grow box, a favorable indicator of which is the key to effective mold control. Lastly, ventilation allows the grower to eliminate all sorts of odors and pollen. To do this, a carbon filter is installed in it, which does not allow aromatic compounds to come out.

How to calculate ventilation in a grow box?

Ventilation in the grow box is calculated based on the volume of internal space. So that outside the structure there is no smell, the air inside it must be completely renewed within 3-10 minutes. The volume is calculated by multiplying the height, length and width of the structure together. Next, it is calculated how many times during an hour the fan will have to renew the air inside. To do this, 60 minutes are divided by the selected interval. Depending on the number obtained, we calculate the required fan power by multiplying it by the volume of the grow box. We add 20% to the new number, thus taking into account the losses during air movement. We choose a carbon filter with the same or increased performance. As a reminder, the outlet of the ventilation system must be at the top of the grow box, as hotter air always rises.

Components of the ventilation system

First of all, the basis of any ventilation system is a fan that is installed on the outflow of air outside the grow box, attached to the outside of its wall. As an example, I would like to give a model of a duct fan TD-MIXVENT 160/100.

Its capacity of 160 m3/h will be quite enough for a stealth box and a small full-fledged grow box. It works almost silently. Its engine is protected from the negative impact of external factors in accordance with the protection class IP 44, which provides it with a long working life. In case of overload, the fan is able to turn itself off. The grower can also adjust the voltage supplied to it, which allows you to change the working speed.

In tandem with this fan, the MagicAir 160/100 m3 charcoal filter will work perfectly, allowing you to purify the air inside the grow box.

All thanks to a cartridge with high-quality activated carbon, which is recommended to change everything only once a year. The model is equipped with a replaceable fabric pre-filter, which can significantly extend the working life of the cartridge by retaining dust, pollen and other small particles. It is enough for 3 months of work, after which it is enough just to wash it. The material does not lose its qualities within 3 washes.

The last element of the ventilation system is the duct. For the ventilation elements already mentioned above, an Aludec DA3 air duct with a duct diameter of 102 mm will be suitable.

It has a layered structure, represented by aluminum foil and polyester, which is based on steel spirals. The corrugated surface provides the duct with ideal flexibility. Its total length is 10 m. It is fastened with ordinary clamps.

Growbox Automation

In conclusion, I would like to tell you a little about automation, with the help of which the grower does not have to control everything on his own. To automate the lighting mode, an excellent solution would be the TM 24 electric timer, which will turn the light on and off on its own in accordance with the established schedule.

It is capable of operating in several modes, and the entire process of setting it up is displayed on a small display. Setting it up is quite simple, just follow the instructions that come with the kit. Its body is protected from mechanical damage and falls, which guarantees a long service life.

You can constantly be aware of the level of humidity and temperature in the growbox using the Garden Highpro Medium weather station.

No matter what temperature the grow box should be, this device will always show the grower the exact temperature between 0 and 50 degrees Celsius. It also measures humidity levels between 25 and 90%. With the help of a remote probe 1.5 meters long, all these indicators can be measured outside the structure. The advantages of the weather station include a large three-line display, a simple system of settings and control, compact size and light weight.

show all

Tips from Agrodom

The operation of the TDS meter is based on the electrical conductivity of water - electrodes immersed in an aqueous medium create an electric field between themselves. Pure distilled water does not conduct current by itself, it is formed by various impurities and compounds dissolved in water.